IRON CYCLES INC.
INDEPENDENTLY OWNED
INDEPENDENTLY OPERATED
SINCE 1993
Iron Cycles Inc.
225 Forsgate Drive
Jamesburg NJ 08831
FULL BIKE SERVICE
Iron Cycles knows how important bike maintenance is
So servicing your Harley-Davidson at Iron Cycles will keep your bike running at it's BEST
Our service mechanics perform all factory recommended 2500 mile interval maintenance procedures, which include:
- Drain engine oil & filter and replace with Dynacycle Oil
& Oil Filter *
- Clean or replace tappet screen (Big Twin only)
- Drain primary lube and replace with bike specified type
- Adjust primary chain
- Adjust clutch
- Inspect & clean spark plugs
- Clean or replace air filter
- Check tire condition and air pressure
- Check brake fluid
& Oil Filter *
- Check condition of front and rear brakes
- Check charging system & battery
- Check all electrical components and functions
- Adjust & lube (throttle, idle, & clutch) cables
- Adjust and check condition of drive chain or belt
- Check suspension
- Test ride
- Check for oil leaks
ADDITIONAL MAINTENANCE EVERY 10K MILES
Drain fork oil and replace with PJ1 Fork Oil
Drain transmission lube and replace with DynaCycle* (Big Twin only)
Lube and adjust neck bearings
* We strongly recommend using DynaCycle for all your Oil and Transmission needs over any other manufactures brand oils.
CUSTOM BUILDS
- We have built numerous ground up customs using some of the leading industry manufacturers frames and parts using everything from old school Panheads and or shovelheads with 4 speed kicker only transmissions to modern day twin cams
with 6
speed right side wide tire drives
- We specialize in all of your dreams and desires. We have access to every part or manufacturer available today
- We have access to every part or manufacturer available today
- We will take the time to sit down and explain the ins and outs of bike building a custom here in NJ to what is involved on our end of the build up
COMPLETE MACHINE SHOP
We handle all Harley Davidson/Buell motorcycle machining services ranging from
basic head services and cylinder boring up to full blown motor and transmission rebuilding
for every application from street cruiser to race track set-ups on our Kwik-way and Bridgeport milling machines
- Perform all head services from decking and CC ing the chambers to full blown port and polishing services
- Perform case clearancing for bigger bores or large lift cams. We can modify your stock carb for installation of a Thunderslide or modify your S&S Carbs to accept from 1 to 3 Thunderjets for your street or pro stock race
needs
- Perform turning services on our lathe from bushing fabrication to thread repair services. We can weld and repair your cracked or damaged cases (Engine Trans, primary)
